HP MSR ASM Configuration Manual page 363

Source 1 and Source 2 send different multicast information to FF14::101. Host A receives the multicast
information from Source 1 only, and Host B receives the multicast information from Source 2 only. Source
3 sends multicast information to FF1E::202. Host C is a multicast receiver for this multicast group.
Serial 2/1 of Router B acts as a C-BSR and C-RP of IPv6 admin-scoped zone 1, which serve the IPv6
multicast groups with the Scope field value in their group addresses being 4. Serial 2/1 of Router D acts
as a C-BSR and C-RP of admin-scoped zone 2, which also serve the IPv6 multicast groups with the Scope
field value in their group addresses being 4. Serial 2/1 of Router F acts as a C-BSR and a C-RP of the
global-scoped zone, which serve IPv6 multicast groups with the Scope field value in their group
addresses being 14.
MLDv1 runs between Router A, Router E, Router I ,and their respective receivers.
Figure 97 Network diagram
IPv6 admin-scope 1
Receiver
Host A
Eth1/1
S2/1
Router A
Router I
S2/1
S2/1
IPv6 PIM-SM
IPv6 global-scope
Table 29 shows the interface and IPv6 address assignment, and network topology scheme.
Table 29 Interface and IPv6 address assignment
Device Interface
Router A Eth1/1
Router A S2/1
Router B Eth1/1
Router B S2/1
Router B POS5/1
Router B POS5/2
Router C Eth1/1
Source 1
Eth1/1
POS5/2
S2/1
Router B
ZBR
Router H
POS5/1
POS5/2
Source 2
Receiver
Host C
Receiver
Host B
IPv6 address
1001::1/64
1002::1/64
2001::1/64
1002::2/64
2002::1/64
2003::1/64
3001::1/64
351
Eth1/1
Source 3
POS5/2
Router C
ZBR
S2/1
S2/1
Eth1/1
IPv6 admin-scope 2
Device Interface
Router D S2/1
Router D S2/2
Router D POS5/1
Router E Eth1/1
Router E S2/1
Router E S2/2
Router F S2/1
Router G
S2/1
S2/1
Router F
POS5/1
POS5/1
Router D
ZBR
S2/2
S2/2
Router E
IPv6 address
3002::2/64
6001::1/64
6002::1/64
7001::1/64
3003::2/64
6001::2/64
8001::1/64