Step
1.
Enter system view.
2.
Enter public network PIM view
or VPN instance PIM view.
3.
Configure a C-BSR for an
admin-scoped zone.
•
Configure C-BSRs for the global-scoped zone:
Perform the following configuration on the routers that you want to configure as C-BSRs in the
global-scoped zone.
To configure a C-BSR for the global-scoped zone:
Step
1.
Enter system view.
2.
Enter public network PIM view
or VPN instance PIM view.
3.
Configure a C-BSR for the
global-scoped zone.
Configuring PIM-SSM
PIM-SSM needs the support of IGMPv3. Be sure to enable IGMPv3 on PIM routers with multicast
receivers.
PIM-SSM configuration task list
Complete these tasks to configure PIM-SSM:
Task
Enabling PIM-SM
Configuring the SSM group range
Configuring common PIM features
Configuration prerequisites
Before you configure PIM-SSM, complete the following tasks:
Configure any unicast routing protocol so that all devices in the domain are interoperable at the
•
network layer.
•
Determine the SSM group range.
Command
system-view
pim [ vpn-instance
vpn-instance-name ]
c-bsr group group-address { mask |
mask-length } [ hash-length
hash-length | priority priority ] *
Command
system-view
pim [ vpn-instance
vpn-instance-name ]
c-bsr global [ hash-length
hash-length | priority priority ] *
Remarks
Required.
Optional.
Optional.
80
Remarks
N/A
N/A
No C-BSRs are configured for an
admin-scoped zone by default.
The group-address { mask |
mask-length } argument can
specify the multicast groups that
the C-BSR serves, in the range of
239.0.0.0/8.
Remarks
N/A
N/A
No C-BSRs are configured for the
global-scoped zone by default.