Ipv6 Bidir-Pim Configuration Example - HP MSR ASM Configuration Manual

Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFBE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFCE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFDE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFEE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFFE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51

IPv6 BIDIR-PIM configuration example

Network requirements
In the IPv6 BIDIR-PIM domain shown in
information to IPv6 multicast group FF14::101. Host A and Host B receive IPv6 multicast information from
the two sources.
Serial 2/1 of Router C acts as a C-BSR, and loopback interface 0 acts as a C-RP of the IPv6 BIDIR-PIM
domain.
MLDv1 runs between Router B and Host A and between Router D and Host B.
Figure 98, Source 1 and Source 2 send different IPv6 multicast
362