HP MSR ASM Configuration Manual page 112

# On Router B, enable IP multicast routing and administrative scoping, and enable PIM-SM on
each interface.
<RouterB> system-view
[RouterB] multicast routing-enable
[RouterB] pim
[RouterB-pim] c-bsr admin-scope
[RouterB-pim] quit
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] pim sm
[RouterB-Ethernet1/1] quit
[RouterB] interface serial 2/1
[RouterB-Serial2/1] pim sm
[RouterB-Serial2/1] quit
[RouterB] interface pos 5/1
[RouterB-Pos5/1] pim sm
[RouterB-Pos5/1] quit
[RouterB] interface pos 5/2
[RouterB-Pos5/2] pim sm
[RouterB-Pos5/2] quit
# Enable IP multicast routing and administrative scoping, and enable PIM-SM on Router C, Router
D, Router F, Router G, and Router H in the same way. (Details not shown.)
3. Configure an admin-scoped zone boundary:
# On Router B, configure POS 5/1 and POS 5/2 as the boundary of admin-scoped zone 1.
[RouterB] interface pos 5/1
[RouterB-Pos5/1] multicast boundary 239.0.0.0 8
[RouterB-Pos5/1] quit
[RouterB] interface pos 5/2
[RouterB-Pos5/2] multicast boundary 239.0.0.0 8
[RouterB-Pos5/2] quit
# On Router C, configure POS 5/1 and POS 5/2 as the boundary of admin-scoped zone 2.
<RouterC> system-view
[RouterC] interface pos 5/1
[RouterC-Pos5/1] multicast boundary 239.0.0.0 8
[RouterC-Pos5/1] quit
[RouterC] interface pos 5/2
[RouterC-Pos5/2] multicast boundary 239.0.0.0 8
[RouterC-Pos5/2] quit
# On Router D, configure POS 5/1 as the boundary of admin-scoped zone 2.
<RouterD> system-view
[RouterD] interface pos 5/1
[RouterD-Pos5/1] multicast boundary 239.0.0.0 8
[RouterD-Pos5/1] quit
4. Configure C-BSRs and C-RPs:
# On Router B, configure the service scope of RP advertisements and configure Serial 2/1 as a
C-BSR and C-RP of admin-scoped zone 1.
[RouterB] acl number 2001
[RouterB-acl-basic-2001] rule permit source 239.0.0.0 0.255.255.255
100