Controlling Route Distribution And Reception; Configuration Prerequisites; Injecting A Local Ipv6 Mbgp Route; Configuring Ipv6 Mbgp Route Redistribution - HP MSR ASM Configuration Manual

apply preferred-value preferred-value command. For more information about these commands, see
Layer 3—IP Routing Command Reference.
To configure a preferred value for routes from a peer or a peer group:
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP address
family view.
4. Specify a preferred value for
routes received from the IPv6
MBGP peer or the peer
group.

Controlling route distribution and reception

Configuration prerequisites

Before you configure this task, complete the following tasks:
Enable IPv6.
•
Configure basic IPv6 MBGP functions.
•

Injecting a local IPv6 MBGP route

Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP address
family view.
4. Inject a network into the IPv6
MBGP routing table.

Configuring IPv6 MBGP route redistribution

Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP multicast
address family view.
4. Enable default route
redistribution into the IPv6
MBGP routing table.
Command
system-view
bgp as-number
ipv6-family multicast
peer { ipv6-group-name |
ipv6-address } preferred-value
value
Command
system-view
bgp as-number
ipv6-family multicast
network ipv6-address prefix-length
[ route-policy route-policy-name |
short-cut ]
Command
system-view
bgp as-number
ipv6-family multicast
default-route imported
421
Remarks
N/A
N/A
N/A
Optional.
The preferred value defaults to 0.
Remarks
N/A
N/A
N/A
Not injected by default.
Description
N/A
N/A
N/A
Optional.
Default route redistribution is not
allowed by default.