Enabling The Mld Snooping Host Tracking Function; Displaying And Maintaining Mld Snooping - HP MSR ASM Configuration Manual

Enabling the MLD snooping host tracking function

With the MLD snooping host tracking function, the switch can record the information of the member hosts
that are receiving IPv6 multicast traffic, including host IPv6 address, running duration, and timeout time.
You can monitor and manage the member hosts according to the recorded information.
Enabling the MLD snooping host tracking function globally
Step
1. Enter system view.
2. Enter MLD-snooping view.
3. Enable the MLD snooping host
tracking function globally.
Enabling the MLD snooping host tracking function in a VLAN
Step
1. Enter system view.
2. Enter VLAN view.
3. Enable the MLD snooping host
tracking function in the VLAN.

Displaying and maintaining MLD snooping

Task
Display MLD snooping group
information.
Display information about the
hosts tracked by MLD
snooping.
Display statistics for MLD
messages learned through MLD
snooping.
Remove dynamic group entries
of a specified MLD snooping
group or all MLD snooping
groups.
Command
system-view
mld-snooping
host-tracking
Command
system-view
vlan vlan-id
mld-snooping host-tracking
Command
display mld-snooping group [ vlan vlan-id ]
[ verbose ] [ | { begin | exclude | include }
regular-expression ]
display mld-snooping host vlan vlan-id group
ipv6-group-address [ source
ipv6-source-address ] [ | { begin | exclude |
include } regular-expression ]
display mld-snooping statistics [ | { begin |
exclude | include } regular-expression ]
reset mld-snooping group { ipv6-group-address
| all } [ vlan vlan-id ]
406
Remarks
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
Disabled by default.
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in user view.
This command takes effect
only on an MLD
snooping-enabled VLAN,
but not on a VLAN with
MLD enabled on its VLAN
interface.
This command cannot
remove the static group
entries of MLD snooping
groups.