Configuring An Ipv6 Basic Acl; Configuring An Advanced Acl - HP FlexNetwork MSR Series Configuration Manuals

Step
26. Create or edit a rule.
27. (Optional.) Add or edit a rule
comment.

Configuring an IPv6 basic ACL

IPv6 basic ACLs match packets based only on source IP addresses.
To configure an IPv6 basic ACL:
Step
1. Enter system view.
2. Create an IPv6 basic ACL
view and enter its view.
3. (Optional.)
description for the IPv6 basic
ACL.
4. (Optional.)
numbering step.
5. Create or edit a rule.
6. (Optional.) Add or edit a rule
comment.

Configuring an advanced ACL

This section describes procedures for configuring IPv4 and IPv6 advanced ACLs.
Command
rule [ rule-id ] { deny | permit }
[ counting | fragment | logging |
source
address-group-name
source-address source-wildcard |
any
time-range-name | vpn-instance
vpn-instance-name ] *
rule rule-id comment text
Command
system-view
acl ipv6 basic { acl-number |
name acl-name } [ match-order
{ auto | config } ]
Configure a
description text
Set the rule
step step-value
rule [ rule-id ] { deny | permit }
[ counting | fragment | logging |
routing [ type routing-type ] |
source
address-group-name
source-address source-prefix |
source-address/source-prefix
any
time-range-name | vpn-instance
vpn-instance-name ] *
rule rule-id comment text
{ object-group
|
} | time-range
{ object-group
|
|
} | time-range
10
Remarks
By default, no IPv4 basic ACL
rules exist.
The logging keyword takes effect
only when the module
example, packet filtering) that
uses the ACL supports logging.
By default, no rule comment is
configured.
Remarks
N/A
By default, no ACLs exist.
The value range for a numbered
IPv6 basic ACL is 2000 to 2999.
Use the acl ipv6
acl-number command to enter the
view of a numbered IPv6 basic
ACL.
Use the acl ipv6 basic name
acl-name command to enter the
view of a named IPv6 basic ACL.
By default, an IPv6 basic ACL
does not have a description.
The default setting is 5.
By default, no IPv6 basic ACL
rules exist.
The logging keyword takes effect
only when the module
example, packet filtering) that
uses the ACL supports logging.
By default, no rule comment is
configured.
(for
basic
(for