Configuring IPv6 BIDIR-PIM
This section describes how to configure IPv6 BIDIR-PIM.
IPv6 BIDIR-PIM configuration task list
Task
Enabling IPv6 PIM-SM
Enabling IPv6 BIDIR-PIM
Configuring an RP
Configuring a BSR
Configuring IPv6 administrative
scoping
Configuring common IPv6 PIM features
Configuration prerequisites
Before you configure IPv6 BIDIR-PIM, complete the following tasks:
Enable IPv6 forwarding and configure an IPv6 unicast routing protocol so that all devices in the
•
domain can communicate with each other at Layer 3.
Determine the IPv6 address of a static RP and the IPv6 ACL that defines the range of IPv6 multicast
•
groups to be served by the static RP.
Determine the C-RP priority and the IPv6 ACL that defines the range of IPv6 multicast groups to be
•
served by each C-RP.
•
Determine the legal C-RP address range and the IPv6 ACL that defines the range of IPv6 multicast
groups to be served.
Determine the C-RP-Adv interval.
•
Determine the C-RP timeout timer.
•
Determine the C-BSR priority.
•
Determine the hash mask length.
•
Determine the IPv6 ACL defining the legal BSR address range.
•
Determine the BS period.
•
Configuring a static RP
Configuring a C-RP
Enabling embedded RP
Configuring C-RP timers globally
Configuring a C-BSR
Configuring an IPv6 BIDIR-PIM domain border
Configuring C-BSR parameters globally
Configuring C-BSR timers
Disabling BSM semantic fragmentation
Enabling IPv6 administrative scoping
Configuring an IPv6 admin-scoped zone
boundary
Configuring C-BSRs for each admin-scoped zone
325
Remarks
Required.
Required.
Required.
Use any method.
Optional.
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.