Configuring Ipv6 Mbgp Route Summarization; Advertising A Default Route To A Peer Or Peer Group - HP MSR ASM Configuration Manual

Step
5. Enable route redistribution
from another routing protocol.
NOTE:
If the default-route imported command is not configured, using the import-route command cannot
redistribute any IGP default route.

Configuring IPv6 MBGP route summarization

To reduce the routing table size on medium and large BGP networks, you must configure route
summarization on IPv6 MBGP routers. BGP supports only manual summarization of IPv6 multicast routes.
To configure IPv6 MBGP route summarization:
Step
1. Enter system view
2. Enter BGP view
3. Enter IPv6 MBGP address family
view
4. Configure manual route
summarization

Advertising a default route to a peer or peer group

Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP address
family view.
4. Advertise a default route to an
IPv6 MBGP peer or peer
group.
NOTE:
With the peer default-route-advertise command executed, the router sends a default route with the next
hop as itself to the specified IPv6 MBGP peer or the specified peer group, regardless of whether the default
route is available in the routing table.
Command
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
Command
system-view
bgp as-number
ipv6-family multicast
aggregate ipv6-address prefix-length
[ as-set | attribute-policy
route-policy-name | detail-suppressed |
origin-policy route-policy-name |
suppress-policy route-policy-name ]*
Command
system-view
bgp as-number
ipv6-family multicast
peer { ipv6-group-name |
ipv6-address }
default-route-advertise
[ route-policy route-policy-name ]
422
Description
Not enabled by default.
Remarks
N/A
N/A
N/A
Not configured by
default.
Remarks
N/A
N/A
N/A
Not advertised by default.