Ipv6 Bidir-Pim Configuration Example - HP A8800 Configuration Manual

IPv6 BIDIR-PIM configuration example

Network requirements
In the IPv6 BIDIR-PIM domain shown in
information to IPv6 multicast group FF14::101. Host A and Host B receive IPv6 multicast information from
the two sources.
Serial 2/1/9/1:0 of Router C acts as a C-BSR, and loopback interface 0 acts as a C-RP of the IPv6
BIDIR-PIM domain.
MLDv1 runs between Router B and Host A and between Router D and Host B.
Figure 118 Network diagram
Table 30 shows the interface and IPv6 address assignment, and network topology scheme.
Table 30 Interface and IPv6 address assignment
Device
Router A
Router A
Router B
Router B
Router B
Router C
Router C
Router C
Router D
Router D
Router D
Source 1
Figure 1 18, Source 1 and Source 2 send different IPv6 multicast
Interface
GigabitEthernet 3/1/1
Serial 2/1/9/1:0
GigabitEthernet 3/1/1
Serial 2/1/9/1:0
Serial 2/1/9/2:0
Serial 2/1/9/1:0
Serial 2/1/9/2:0
Loopback 0
GigabitEthernet 3/1/1
GigabitEthernet 3/1/2
Serial 2/1/9/1:0
—
440
IPv6 address
1001::1/64
1002::1/64
2001::1/64
1002::2/64
2002::1/64
2002::2/64
3001::1/64
6001::1/128
4001::1/64
5001::1/64
3001::2/64
1001::2/64