Ipv6 Bidir-Pim Configuration Example - HP A6600 Configuration Manual

HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFCE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFDE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFEE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFFE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51

IPv6 BIDIR-PIM configuration example

Network requirements
In the IPv6 BIDIR-PIM domain shown in
•
multicast information to IPv6 multicast group FF14::101. Host A and Host B receive IPv6 multicast
information from the two sources.
Serial 2/0/1 of Router C acts as a C-BSR, and loopback interface 0 acts as a C-RP of the IPv6
•
BIDIR-PIM domain.
• MLDv1 will run between Router B and Host A, and between Router D and Host B.
Figure 101, Source 1 and Source 2 send different IPv6
359