Front Suspension Frame Removal And Installation - Suzuki Liana RH413 Service Manual

Front Suspension Frame Removal and
Installation
Removal
1) Hoist vehicle and remove wheels (right & left).
2) Remove stabilizer bar. Refer to "Front Stabilizer Bar
and/or Bushings Removal and Installation".
3) Remove suspension arms (right & left). Refer to
"Suspension Control Arm / Bushing Removal and
Installation".
4) Remove engine rear mounting nuts and engine
mounting member bolts (2WD vehicle).
NOTE
• For 2WD vehicle, be careful not to loose
cushions (5) and spacers (4) which may
stick to suspension frame (1).
• For 4WD vehicle, support transmission to
prevent joint parts from being applied
excessive force at removal of suspension
frame (1).
[B]: For 2WD vehicle
5) Remove suspension frame from body.
S3RH0A2206019
I4RH01220019-01
2. Engine rear mounting
3. Mounting member
I2RH01220058-01
Installation
1) Install suspension frame (1) to body, and tighten bolt
to specified torque.
Tightening torque
Suspension frame mounting bolt (a): 90 N·m (
9.0 kgf-m, 65.0 lb-ft)
2) Install mounting member (2), spacers and cushions
to suspension frame (1) if removed and tighten bolts
and nuts to specified torque.
Tightening torque
Mounting member nut (b): 55 N·m (5.5 kgf-m,
40.0 lb-ft)
Engine rear mounting nut (g): 45 N·m (4.5 kgf-
m, 33.0 lb-ft)
[A]: 2WD vehicle
[B]: 4WD vehicle
Front Suspension: 2B-19
1
(a)
I2RH01220059-01
I3RH0A220008-01
3. Rear engine mounting