Suzuki Liana RH413 Service Manual page 40

0B-8 Maintenance and Lubrication:
Brake Lever and Cable Inspection
1) Inspect brake cable for damage and smooth
movement.
Replace cable if it is in deteriorated condition.
2) Check tooth tip of each notch for damage or wear. If
any damage or wear is found, replace parking lever.
3) Check parking brake lever for proper operation and
stroke, and adjust it if necessary.
For checking and adjusting procedures, refer to
"Parking Brake Inspection and Adjustment in Section
4D".
Parking brake lever stroke
"a": 6 – 9 notches (with 200 N, 20 kg (44 lbs) of pull
pressure)
Clutch Fluid Inspection
1) Check system for evidence of fluid leakage. Repair
leaky point if any.
2) Check reservoir for fluid level referring to "Clutch
Fluid Inspection in Section 5C".
Tires / Wheels Inspection
S3RH0A0206018
1) Check tires for uneven or excessive wear, or
damage. If defective, replace.
Refer to "Irregular and/or Premature Wear
Description in Section 2D"and "Wear Indicators
Description in Section 2D" for details.
I2RH01020018-01
2) Check inflating pressure of each tire and adjust
pressure to specification as necessary.
NOTE
• Tire inflation pressure should be checked
when tires are cool.
• Specified tire inflation pressure should be
found on tire placard or in owner's manual
which came with the vehicle.
3) Rotate tires. For details, refer to "Tire Rotation in
Section 2D".
Wheel Discs Inspection
Inspect each wheel disc for dents, distortion and cracks.
A disc in badly damaged condition must be replaced.
Wheel Bearing Inspection
I2RH01020019-01
1) Check front wheel bearing for wear, damage,
abnormal noise or rattles. For details, refer to "Front
S3RH0A0206020
Wheel Disc, Nut and Bearing Check in Section 2B".
2) Check rear wheel bearing for wear, damage,
abnormal noise or rattles. For details, refer to "Rear
Wheel Disc, Nut and Bearing Check in Section 2C".
I2RH01530003-01
S3RH0A0206021
I2RH01020022-01
1. Wear indicator
S3RH0A0206022
S3RH0A0206023
I2RH01020023-01