Clutch Fluid Inspection; Clutch Fluid Pipe And Hose Components - Suzuki Liana RH413 Service Manual

Clutch Fluid Inspection

Fluid level should be always between MIN and MAX
lines on reservoir. If fluid decreases quickly, check for
leakage, repair leaky point, if any, and add fluid up to
MAX level.
: Fluid SAE J1703 or DOT-3 (brake fluid)
CAUTION
!
• Brake fluid damages painted surface badly.
Should it get on painted surface, remove it
immediately and clean surface thoroughly.
• Do not use shock absorber fluid or any
other fluid which contains mineral oil. Do
not use container which has been used for
mineral oil or which is wet from water.
Mineral oil will cause swelling and
distortion of rubber parts in hydraulic
clutch system and water will mix with
brake fluid, lowering fluid boiling point.
Keep all fluid containers capped to prevent
contamination.
• Make sure not to use fluid whose container
cap was first opened more than a year ago.

Clutch Fluid Pipe and Hose Components

[A]
3
4
7
[A]: For left-hand steering vehicle
[B]: For right-hand steering vehicle
S3RH0A5306003
1
6 16 N·m
(1.6 kg-m)
2
6 16 N·m (1.6 kg-m)
23 N·m (2.3 kg-m)
1. Master cylinder
2. Pipe
[B]
1
5
2
6 16 N·m (1.6 kg-m)
3. Hose 5. Clamp
4. Operating cylinder
5
6 16 N·m (1.6 kg-m)
3
4
7. Union bolt
6. Clutch pipe flare nut : Tightening torque
Clutch: 5C-4
I2RH01530003-01
S3RH0A5306004
7 23 N·m
(2.3 kg-m)
I3RH0A530001-01