Valves And Cylinder Head Components - Suzuki Liana RH413 Service Manual

1D-27 Engine Mechanical:

Valves and Cylinder Head Components

1. Valve cotters
2. Valve spring retainer
3. Valve spring
4. Valve stem seal
5. Valve spring seat
6. Intake valve
7. Exhaust valve
8. Valve guide
9. Cylinder head bolt for M10
: Make sure of cylinder head bolt (M10) diameter when reusing it due
to plastic deformation tightening referring to "Valves and Cylinder
Head Removal and Installation".
: Tighten 20 N⋅m (2.0 kgf-m, 14.5 lb-ft), 40 N⋅m (4.0 kgf-m, 29.0 lb-ft),
60° and 60° by the specified procedure.
10. Cylinder head
11. Cylinder head gasket
: "TOP" mark provided on gasket comes to crankshaft pulley side,
facing up.
12. Knock pin
S3RH0A1406031
I3RH0A140007-01
13. Cylinder head bolt for M8
: Tighten 22 N⋅m (2.2 kgf-m, 16.0 lb-ft)
by the specified procedure.
: Tightening torque
: Do not reuse.
: Apply engine oil to sliding surface of
each part.