Suzuki Liana RH413 Service Manual page 423

Differential side bearing
1) Press-fit differential side bearing (1) with special tool.
Special tool
(A): 09951-16060
(B): 09924-74510
2) Hold bearing (2) press-fitted in Step 1) with holder
and press-fit differential side bearing (1) on the other
side.
NOTE
Be sure to use bearing holder for the purpose
of protecting lower bearing.
Special tool
(A): 09951-16060
(B): 09924-74510
(C): 09923-78210
Differential unit
1) Install side oil seal to bearing outer race (1).
Then apply grease to oil seal lip.
: Grease 99000–25010
Special tool
(A): 09913-75520
I3RH01322034-01
2) Place bearing outer races (1) on their respective
bearings.
NOTE
Used left and right outer races are not
interchangeable.
3) After applying differential oil to side bearings, install
case assembly (2) in differential carrier (3).
4) Tighten bearing retainer.
Special tool
I3RH01322035-01
(B): 09923-58520
Differential: 3B-10
I3RH01322036-01
I3RH01322037-01
I3RH01322038-01