• Be sure to use special tools when instructed.
Special tool
(A): 09917-98221
(B): 09916–58210
• When disconnecting vacuum hoses, attach a tag
describing the correct installation positions so that the
hoses can be reinstalled correctly.
• After servicing fuel, oil, coolant, vacuum, exhaust or
brake systems, check all lines related to the system
for leaks.
• For vehicles equipped with fuel injection systems,
never disconnect the fuel line between the fuel pump
and injector without first releasing the fuel pressure, or
fuel can be sprayed out under pressure.
• When performing a work that produces a heat
exceeding 80 °C (176 °F) in the vicinity of the
electrical parts, remove the heat sensitive electrical
part(s) beforehand.
• Use care not to expose connectors and electrical
parts to water which will be a cause of a trouble.
I2RH01010031-01
• Always be careful not to handle electrical parts
(computer, relay, etc.) in a rough manner or drop
them.
I2RH01010032-01
Precautions for Catalytic Converter
CAUTION
!
For vehicles equipped with a catalytic
converter, use only unleaded gasoline and be
careful not to let a large amount of unburned
I2RH01010033-01
gasoline enter the converter or it can be
damaged.
• Conduct a spark jump test only when
necessary, make it as short as possible,
and do not open the throttle.
• Conduct engine compression checks
within the shortest possible time.
• Avoid situations which can result in engine
misfire (e.g. starting the engine when the
fuel tank is nearly empty.)
Precautions:
00-6
I2RH01010034-01
I2RH01010035-01
I2RH01010036-01
S3RH0A0000003