3B-15 Differential:
Drive Bevel Pinion Shim Adjustment
Description
To mesh bevel pinion and gear correctly, it is prerequired to install bevel pinion to differential carrier properly by using
adjusting shim as described on the following steps. Shown in the following figure are relative positions of bevel pinion,
differential carrier and mounting dummy.
Special tool
(A): 09900-20606
(B): 09922-77280
(C): 09922-75222
"a": Pinion dummy height
"b": Mounting dummy height
"c": Measured dimension
"d": Bevel pinion mounting distance (= "a" + "b" = 80 mm (3.150 in.))
"e": Shim size for mounting distance adjustment (= "c")
1. 36 mm nut (Spare parts No. 09159-28002)
2. Flange
3. Front bearing
4. Rear bearing
5. Differential carrier
S3RH0A3206008
I3RH01322051-01
6. Bevel pinion nut
7. Front case
8. Spacer
9. Bevel pinion
10. Bevel gear