Tightening Torque Specifications - Suzuki Liana RH413 Service Manual

Item
P/S belt tension

Tightening Torque Specifications

Fastening part
Tension pulley bolt and nut
Tie-rod end castle nut
Wheel nut
Tie-rod end lock nut
Gear box mounting bolt
Gear box cylinder pipe flare nut
Gear box high and low pressure pipe flare nut
Steering shaft upper and lower joint bolt
Tie-rod ball nut
Pump cover bolt
Pressure switch
Plug
Suction connector bolt
NOTE
The specified tightening torque is also described in the following.
"P/S Gear Box Components"
"P/S Pump Components"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
For vehicle with A/C system
7 – 9 mm (0.28 – 0.35 in.) deflection for new belt
9 – 11 mm (0.35 – 0.43 in.) deflection for used belt
(The push force should be about 100 N (10 kg, 22lb).)
For vehicle without A/C system
4 – 9 mm (0.16 – 0.35 in.) deflection for new and used belts
(The push force should be about 100 N (10 kg, 22 lb).)
Tightening torque
N⋅m
25
45
85
45
55
25
35
25
70
28
28
60
12
Power Assisted Steering System:
Specification
kgf-m lb-ft
2.5 18.0
4.5 32.5
8.5 61.5
4.5 32.5
5.5 40.0
2.5 18.0
3.5 25.0
2.5 18.0
7.0 50.5
2.8 20.0
2.8 20.0
6.0 43.5
1.2 8.5
6C-22
S3RH0A6307002
Note
/