Forward And Reverse Clutch Assembly Components; Forward And Reverse Clutch Assembly Preliminary Check - Suzuki Liana RH413 Service Manual

5A-120 Automatic Transmission/Transaxle:

Forward and Reverse Clutch Assembly Components

1. Forward clutch balancer
2. Forward clutch return spring
subassembly
3. Forward clutch piston
4. Forward clutch piston O-ring
5. Forward clutch drum
6. Forward clutch drum O-ring
7. Intermediate shaft subassembly
Forward and Reverse Clutch Assembly
Preliminary Check
1) Install forward and reverse clutch assembly (1) to
transaxle rear cover (2), blow in compressed air (400
– 800 kPa, 4 – 8 kg/cm
hole of transaxle rear cover with the special tool
attached on the upper surface of reverse clutch
retaining plate (3), and measure reverse clutch
piston stroke.
If piston stroke exceeds specified value,
disassemble, inspect and replace inner parts.
8. Inter mediate shaft seal ring
9. Reverse clutch plate snap ring
10. Reverse clutch retaining plate
11. Reverse clutch separator plate
12. Reverse clutch disc
13. Forward clutch plate snap ring
14. Forward clutch retaining plate
S3RH0A5106035
2 , 57 – 113 psi) through oil
15. Forward clutch disc
16. Forward clutch separator plate
17. Balancer snap ring
18. Cushion plate
: Apply automatic transaxle fluid.
: Do not reuse.
Special tool
(A): 09900–20607
(B): 09900–20701
Reverse clutch piston stroke
1.2 – 1.6 mm (0.047 – 0.063 in.)
S3RH0A5106034
I3RH0A510029-01