Registering Products-Mandatory For Validating Slas - Juniper EX4300 Hardware Manual

Table 86: Inventory of Components Provided with an EX4300 Switch (continued)
Component
Mounting brackets
Mounting screws
Rubber feet
RJ-45 cable and RJ-45 to DB-9 serial port adapter
Quick Start installation instructions
Juniper Networks Product Warranty
End User License Agreement
Related
Documentation
Registering Products—Mandatory for Validating SLAs
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
NOTE: You must provide the appropriate mounting screws for mounting the
switch on a rack or a cabinet.
EX4300 Switches Hardware Overview on page 3
Unpacking an EX4300 Switch on page 161
Register all new Juniper Networks hardware products and changes to an existing installed
product using the Juniper Networks website to activate your hardware replacement
service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website
and update the installation base data if there is any addition or change to
the installation base or if the installation base is moved. Juniper Networks
will not be held accountable for not meeting the hardware replacement
service-level agreement for products that do not have registered serial
numbers or accurate installation base data.
Register your product(s) at:
Update your install base at:
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
Contacting Customer Support to Obtain Return Material Authorization on page 262
Contacting Customer Support to Obtain a Return Materials Authorization for an NFX250
Device
Quantity
2
8
4
1
1
1
1
https://tools.juniper.net/svcreg/SRegSerialNum.jsp
Chapter 10: Unpacking the Switch
.
163
.