Registering Products-Mandatory For Validating Slas - Juniper EX4500 Hardware Manual

Table 61: Inventory of Components Provided with an EX4500 Switch (continued)
Component
Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP, category #5
RJ-45 to DB-9 serial port adapter
Related
Documentation
Registering Products—Mandatory for Validating SLAs
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
NOTE: You must provide mounting screws that are appropriate for your rack
to mount the chassis on a rack or a cabinet.
Unpacking an EX4500 Switch on page 121
EX4500 Switches Hardware Overview on page 3
Register all new Juniper Networks hardware products and changes to an existing installed
product using the Juniper Networks website to activate your hardware replacement
service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website
and update the installation base data if there is any addition or change to
the installation base or if the installation base is moved. Juniper Networks
will not be held accountable for not meeting the hardware replacement
service-level agreement for products that do not have registered serial
numbers or accurate installation base data.
Register your product(s) at:
Update your install base at:
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
Contacting Customer Support to Obtain Return Material Authorization on page 227
Contacting Customer Support to Obtain a Return Materials Authorization for an NFX250
Device
Chapter 11: Unpacking the Switch
Quantity
1
1
https://tools.juniper.net/svcreg/SRegSerialNum.jsp .
.
123