Installing The T4000 Fpcs After An Upgrade From A T640 Or T1600 Router; Registering Your T4000 Upgrade - Juniper T4000 Hardware Manual

Related
Documentation

Installing the T4000 FPCs After an Upgrade from a T640 or T1600 Router

Related
Documentation

Registering Your T4000 Upgrade

Related
Documentation
Copyright © 2013, Juniper Networks, Inc.
CB 1 REV 09
SIB 0 REV 02
SIB 1 REV 02
SIB 2 REV 02
SIB 3 REV 02
SIB 4 REV 02
Fan Tray 0
Fan Tray 1
Fan Tray 2
T4000 Upgrade Kit on page 164
Checking the Hardware Version of T640 or T1600 Components on page 156
After the SIBs have been upgraded, you can install Type 5 FPCs and PICs.
Install the Type 5 FPCs (T4000 FPC5).
1.
See "Installing a T4000 FPC" on page 245
Install Type 5 PICs.
2.
See "Installing a T4000 PIC" on page
T4000 FPC Description on page 30
T4000 PIC Description on page 42
Overview of Upgrading to a T4000 Router on page 167
You must register the upgrade with Juniper Networks upon completion of the upgrade.
To register your upgrade:
Log on to the Juniper Networks Customer Support Center at
1.
http://www.juniper.net/customers/support/
Click on
Update Install Base
2.
Follow the instructions provided in this link.
3.
After your upgrade is registered, allow up to 45 days for restocking of the new hardware
configuration to support any Next Day or Same Day contracts. Juniper Networks will
provide Best Effort support until restocking of the upgraded product is complete.
Overview of Upgrading to a T4000 Router on page 167
Chapter 16: Upgrading to a T4000 Router
710-022597 EF9180
711-036340 EE6290
711-036340 EE6290
711-036340 EE6290
711-036340 EE6290
711-036340 EE6290
255.
.
.
CB-LCC-S
FANTRAY-T4000-S
FANTRAY-T4000-S
FAN-REAR-TXP-LCC-S
175