D-Link DES-3550 Command Line Interface Reference Manual page 159

show link_aggregation
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display Link Aggregation configuration:
DES-3550:4#show link_aggregation
Command: show link_aggregation
Link Aggregation Algorithm = MAC-source-dest
Group ID
Master Port
Member Port
Active Port
Status
Flooding Port
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to display the current link aggregation configuration on the
Switch.
show link_aggregation {group_id <value 1-6> | algorithm}
This command will display the current link aggregation
configuration of the Switch.
<value 1-6> − Specifies the group ID. The Switch allows up to 6 link
aggregation groups to be configured. The group number identifies
each of the groups.
algorithm − Allows you to specify the display of link aggregation by
the algorithm in use by that group.
None.
: 1
: 1
: 5-10
:
: Disabled
: 5
155