D-Link DES-3550 Command Line Interface Reference Manual page 57

show trusted_host
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display the list of trust hosts:
DES-3550:4#show trusted_host
Command: show trusted_host
Management Stations
IP Address
-----------------------
10.53.13.94
Total Entries: 1
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to display a list of trusted hosts entered on the Switch using
the create trusted_host command above.
show trusted_host <ipaddr>
This command is used to display a list of trusted hosts entered on
the Switch using the create trusted_host command above.
<ipaddr> − The IP address of the trusted host.
None.
53