D-Link DES-3550 Command Line Interface Reference Manual page 281

config authen parameter attempt
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the maximum number of authentication attempts at 5:
DES-3550 Layer 2 Fast Ethernet Switch
Used to configure the maximum number of times the Switch will
accept authentication attempts.
config authen parameter attempt <int 1-255>
This command will configure the maximum number of times the
Switch will accept authentication attempts. Users failing to be
authenticated after the set amount of attempts will be denied
access to the Switch and will be locked out of further authentication
attempts. Command line interface users will have to wait 60
seconds before another authentication attempt. Telnet users will be
disconnected from the Switch.
parameter attempt <int 1-255> - Set the maximum number of
attempts the user may try to become authenticated by the Switch,
before being locked out.
Only administrator-level users can issue this command.
DES-3550:4# config authen parameter attempt 5
Command: config authen parameter attempt 5
Success.
DES-3550:4#
277