D-Link DES-3550 Command Line Interface Reference Manual page 233

delete address-binding
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an IP-MAC binding entry from the database of authorized addresses:
DES-3550:4# delete address-binding ip-mac ipaddress 10.1.1.1 mac_address 00-00-00-00-00-06
Command: delete address-binding ip-mac ipaddress 10.1.1.1 mac_address 00-00-00-00-00-06
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to delete IP-MAC Binding entries from the database of authorized
addresses or the black list of blocked addresses.
[ ip-mac [ ipaddress <ipaddr> mac_address <macaddr> | all ] |
blocked [ all | vlan_name <vlan_name> mac_address <macaddr> ] ]
This command will delete IP-MAC Binding entries of authorized or blocked
addresses. Two types of entries may be deleted:
•
IP_MAC – Individual Address Binding entries can be deleted by
entering the physical and IP addresses of the device. Specify all
to delete all the Address Binding entries.
•
Blocked – Blocked address binding entries (bindings between
VLAN names and MAC addresses) can be deleted by entering the
VLAN name and the physical address of the device. To delete all
the Blocked Address Binding entries, toggle all.
<ipaddr> The IP address of the device where the IP-MAC binding is
made.
<macaddr> The MAC address of the device where the IP-MAC binding is
made.
<vlan_name> The VLAN name of the VLAN that is bound to a MAC
address in order to block a specific device on a known VLAN.
all – For IP_MAC binding all specifies all the IP-MAC binding entries; for
Blocked Address Binding entries all specifies all the blocked VLANs and
their bound phsical addresses.
Only administrator-level users can issue this command.
229