D-Link DES-3550 Command Line Interface Reference Manual page 306

show sim
Purpose Used to view the current information regarding the SIM group on the Switch.
Syntax show sim {[candidates {<candidate_id 1-32>} | members {<member_id 1-
32> } | group {commander_mac <macaddr>}] | neighbor]}
Description This command will display the current information regarding the SIM group on the
Switch, including the following:
SIM Version - Displays the current Single IP Management version on the Switch.
Firmware Version - Displays the current Firmware version on the Switch.
Device Name - Displays the user-defined device name on the Switch.
MAC Address - Displays the MAC Address of the Switch.
Capabilities – Displays the type of switch, be it Layer 2 (L2) or Layer 3 (L3).
Platform – Switch Description including name and model number.
SIM State –Displays the current Single IP Management State of the Switch,
whether it be enabled or disabled.
Role State – Displays the current role the Switch is taking, including Commander,
Member or Candidate. A Stand-alone switch will always have the commander role.
Discovery Interval - Time in seconds the Switch will send discovery packets out
over the network.
Hold time – Displays the time in seconds the Switch will hold discovery results
before dropping it or utilizing it.
Parameters candidates <candidate_id 1-32> - Entering this parameter will display information
concerning candidates of the SIM group. To view a specific candidate, include that
candidate's ID number, listed from 1 to 32.
members <member_id 1-32> - Entering this parameter will display information
concerning members of the SIM group. To view a specific member, include that
member's id number, listed from 1 to 32.
group {commander_mac <macaddr>} - Entering this parameter will display
information concerning the SIM group. To view a specific group, include the
commander's MAC address of the group.
neighbor – Entering this parameter will display neighboring devices of the Switch.
A SIM neighbor is defined as a switch that is physically connected to the Switch
but is not part of the SIM group. This screen will produce the following results:
Port – Displays the physical port number of the commander switch where the
uplink to the neighbor switch is located.
MAC Address – Displays the MAC Address of the neighbor switch.
Role – Displays the role (CS, CaS, MS) of the neighbor switch.
Restrictions Only administrator-level users can issue this command.
DES-3550 Layer 2 Fast Ethernet Switch
302