D-Link DES-3550 Command Line Interface Reference Manual page 26

save
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to non-volatile RAM:
DES-3550:4#save
Command: save
Saving all configurations to NV-RAM... Done.
DES-3550:4#
reboot
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the Switch:
DES-3550:4#reboot
Command: reboot
Are you sure want to proceed with the system reboot? (y|n)
Please wait, the switch is rebooting...
DES-3550 Layer 2 Fast Ethernet Switch
Used to save changes in the Switch's configuration to non-volatile
RAM.
save
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch's memory each time the Switch is restarted.
None.
Only administrator-level users can issue this command.
Used to restart the Switch.
reboot
This command is used to restart the Switch.
None.
None.
22