Example usage:
To configure 802.1x authentication parameters for ports 1 – 20:
DES-3550:4#config 802.1x auth_parameter ports 1–20 direction both
Command: config 802.1x auth_parameter ports 1–20 direction both
Success.
DES-3550:4#
config 802.1x auth_protocol
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the authentication protocol on the Switch:
DES-3550:4# config 802.1x auth_protocol radius_pap
Command: config 802.1x auth_protocol local radius_pap
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to configure the 802.1x authentication protocol on the Switch.
config 802.1x auth_protocol [radius_eap | radius_pap]
The config 802.1x auth_protocol command enables you to configure
the authentication protocol.
[radius_eap | radius_pap] – Specify the type of authentication
protocol desired.
Only administrator-level users can issue this command.
194