D-Link DES-3550 Command Line Interface Reference Manual page 81

show error ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the errors of the port 3 of module 1:
DES-3550:4#show error ports 3
Command: show error ports 3
Port number : 1
CRC Error
Undersize
Oversize
Fragment
Jabber
Drop Pkts
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DES-3550 Layer 2 Fast Ethernet Switch
Used to display the error statistics for a range of ports.
show error ports <portlist>
This command will display all of the packet error statistics collected
and logged by the Switch for a given port list.
<portlist> − Specifies a port or range of ports to be displayed.
None.
RX Frames
---------------
19 Excessive Deferral
0 CRC Error
0 Late Collision
0 Excessive Collision 0
11 Single Collision
20837 Collision
TX Frames
----------------
0
0
0
0
0
77