D-Link DES-3550 Command Line Interface Reference Manual page 24

disable telnet
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the Telnet protocol on the Switch:
DES-3550:4#disable telnet
Command: disable telnet
Success.
DES-3550:4#
enable web
Purpose
Syntax
Description
Parameters
Restrictions
NOTE:
manager (port 80). To log on to the web based manager when SSL is enabled, the entry of
your URL must begin with https://. (ex. https://10.90.90.90)
DES-3550 Layer 2 Fast Ethernet Switch
Used to disable the Telnet protocol on the Switch.
disable telnet
This command is used to disable the Telnet protocol on the Switch.
None.
Only administrator-level users can issue this command.
Used to enable the HTTP-based management software on the
Switch.
enable web <tcp_port_number 1-65535>
This command is used to enable the Web-based management
software on the Switch. The user can specify the TCP port number
the Switch will use to listen for Telnet requests.
<tcp_port_number 1-65535> − The TCP port number. TCP ports
are numbered between 1 and 65535. The "well-known" port for the
Web-based management software is 80.
Only administrator-level users can issue this command.
If the SSL function on the Switch has been enabled, this will disable the port for the web
20