D-Link DES-3550 Command Line Interface Reference Manual page 148

disable gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the Generic VLAN Registration Protocol (GVRP):
DES-3550:4#disable gvrp
Command: disable gvrp
Success.
DES-3550:4#
show vlan
Purpose
Syntax
Description
Parameters
Restrictions
DES-3550 Layer 2 Fast Ethernet Switch
Used to disable GVRP on the Switch.
disable gvrp
This command, along with enable gvrp, is used to enable and disable
GVRP on the Switch, without changing the GVRP configuration on
the Switch.
None.
Only administrator-level users can issue this command.
Used to display the current VLAN configuration on the Switch
show vlan {<vlan_name 32>}
This command displays summary information about each VLAN
including the VLAN ID, VLAN name, the Tagging/Untagging status,
and the Member/Non-member/Forbidden status of each port that is
a member of the VLAN.
<vlan_name 32> − The VLAN name of the VLAN for which you
want to display a summary of settings.
None.
144