D-Link DES-3550 Command Line Interface Reference Manual page 108

Example usage:
To designate ports 1 through 5, with instance id 2, to have an auto internalCost and a priority of 16:
DES-3550:4#config stp mst_config_id ports 1-5 instance_id 2
internalCost auto priority 16
Command : config stp mst_config_id ports 1-5 instance_id 2
internalCost auto priority 16
Success.
DES-3550:4#
show stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DES-3550:4#show stp
Command: show stp
STP Status
STP Version
Max Age
Hello Time
Forward Delay
Max Age
TX Hold Count
Forwarding BPDU
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to display the Switch's current STP configuration.
show stp
This command displays the Switch's current STP configuration.
None
None.
: Enabled
: STP Compatible
: 20
: 2
: 15
: 20
: 3
: Enabled
104