D-Link DES-3550 Command Line Interface Reference Manual page 36

Example usage:
To clear a port security entry by port:
DES-3550:4# clear port_security_entry port 6
Command: clear port_security_entry port 6
Success.
DES-3550:4#
show port_security
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the port security configuration:
DES-3550:4#show port_security ports 1-5
Command: show port_security ports 1-5
Port Admin State
----
1
2
3
4
5
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DES-3550 Layer 2 Fast Ethernet Switch
Used to display the current port security configuration.
show port_security {ports <portlist>}
This command is used to display port security information of the
Switch's ports. The information displayed includes port security,
admin state, maximum number of learning address and lock mode.
<portlist> − Specifies a port or range of ports to be viewed.
None.
Max. Learning Addr. Lock Address Mode
----------- -------------------
Disabled 1
Disabled 1
Disabled 1
Disabled 1
Disabled 1
-----------------
DeleteOnReset
DeleteOnReset
DeleteOnReset
DeleteOnReset
DeleteOnReset
32