D-Link DES-3550 Command Line Interface Reference Manual page 132

Example usage:
To configure the traffic scheduling mechanism for each queue:
DES-3550:4# config scheduling 0 max_packet 100 max_latency 150
Command: config scheduling 0 max_packet 100 max_latency 150
Success.
DES-3550:4#
show scheduling
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current scheduling configuration:
DES-3550:4# show scheduling
Command: show scheduling
QOS Output Scheduling
Class ID
------------
Class-0
Class-1
Class-2
Class-3
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to display the currently configured traffic scheduling on the
Switch.
show scheduling
The show scheduling command will display the current traffic
scheduling mechanisms in use on the Switch.
None.
None.
MAX. Packets MAX. Latency
------------------- --------------------
100 150
99 100
91 101
21 201
128