D-Link DES-3550 Command Line Interface Reference Manual page 248

config mac_notification ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable port 7 for MAC address table notification:
DES-3550:4#config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to configure MAC address notification status settings.
config mac_notification ports [<portlist | all] [enable | disable]
MAC address notificiation is used to monitor MAC addresses learned
and entered into the FDB.
<portlist> - Specify a port or range of ports to be configured.
all – Entering this command will set all ports on the system.
[enable | disable] – These commands will enable or disable MAC
address table notification on the Switch.
Only administrator-level users can issue this command.
244