D-Link DES-3550 Command Line Interface Reference Manual page 97

The Multiple Spanning Tree Protocol commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
enable stp
disable stp
config stp version
config stp
config stp ports
create stp instance_id
config stp instance _id
delete stp instance_id
config stp priority
config stp
mst_config_id
config stp mst_ports
show stp
show stp ports
show stp instance
show stp mst_config id
Each command is listed, in detail, in the following sections.
DES-3550 Layer 2 Fast Ethernet Switch
Parameters
[mstp | rstp | stp]
{maxage <value 6-40> | maxhops <value 1-20> | hellotime <value 1-10> |
forwarddelay <value 4-30>| txholdcount <value 1-10> | fbpdu [enable |
disable]}
<portlist> {externalCost [auto | <value 1-200000000>] | hellotime <value 1-
10> | migrate [yes | no] edge [true | false] | p2p [true | false | auto] | state
[enable | disable] | fbpdu [enable|disable] }
<value 1-4>
<value 1-4> [add_vlan | remove_vlan] <vidlist>
<value 1-4>
<value 0-61440> instance_id <value 0-4>
{revision_level <int 0-65535> | name <string>}
<portlist> instance_id <value 0-4> {internalCost [auto | value 1-200000000] |
priority <value 0-240>}
{<portlist>}
{<value 0-4>}
93