D-Link DES-3550 Command Line Interface Reference Manual page 313

download sim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DES-3550 Layer 2 Fast Ethernet Switch
DES-3550:4# config sim commander group_name Trinity
Command: config sim commander group_name Trinity
Success.
DES-3550:4#
Used to download firmware or configuration file to an indicated
device.
download sim [ firmware | configuration] <ipaddr>
<path_filename> {members <mslist> | all}
This command will download a firmware file or configuration file to a
specified device from a TFTP server.
firmware – Specify this parameter if the user wishes to download
firmware to members of a SIM group.
configuration - Specify this parameter if the user wishes to download
a switch configuration to members of a SIM group.
<ipaddr> – Enter the IP address of the TFTP server.
<path_filename> – Enter the path and the filename of the firmware or
switch on the TFTP server.
members – Enter this parameter to specify the members the user
prefers to download firmware or switch configuation files to. The user
may specify a member or members by adding one of the following:
<mslist> - Enter a value, or values to specify which members
of the SIM group will receive the firmware or switch
configuration.
all – Add this parameter to specify all members of the SIM
group will receive the firmware or switch configuration.
Only administrator-level users can issue this command.
309