D-Link DES-3550 Command Line Interface Reference Manual page 267

show authen_enable
Purpose Used to display the method list of authentication methods for
promoting normal user level privileges to Administrator level privileges
on the Switch.
Syntax
show authen_enable [default | method_list_name <string 15> | all]
Description This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Adminstrator level privileges.
Parameters default – Entering this parameter will display the default method list for
users attempting to gain access to Administrator level privileges on the
Switch.
method_list_name <string 15> - Enter an alphanumeric string of up to
15 characters to define the given method list the user wishes to view.
all – Entering this parameter will display all the authentication login
methods currently configured on the Switch.
The window will display the following parameters:
Restrictions None
DES-3550 Layer 2 Fast Ethernet Switch
Method List Name – The name of a previously configured
method list name.
Priority – Defines which order the method list protocols will be
queried for authentication when a user attempts to log on to
the Switch. Priority ranges from 1(highest) to 4 (lowest).
Method Name – Defines which security protocols are
implemeted, per method list name.
Comment – Defines the type of Method. User-defined Group
refers to server groups defined by the user. Built-in Group
refers to the TACACS, XTACACS, TACACS+ and RADIUS
security protocols which are permanently set in the Switch.
Keyword refers to authentication using a technique INSTEAD
of TACACS/XTACACS/TACACS+/RADIUS which are local
(authentication through the local_enable password on the
Switch) and none (no authentication necessary to access any
function on the Switch).
263