D-Link DES-3550 Command Line Interface Reference Manual page 114

create fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a unicast MAC FDB entry:
DES-3550 Layer 2 Fast Ethernet Switch
Used to create a static entry to the unicast MAC address forwarding
table (database).
create fdb <vlan_name 32> <macaddr> port <port>
This command will make an entry into the Switch's unicast MAC
address forwarding database.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address that will be added to the forwarding
table.
port <port> − The port number corresponding to the MAC destination
address. The Switch will always forward traffic to the specified
device through this port.
Only administrator-level users can issue this command.
DES-3550:4#create fdb default 00-00-00-00-01-02 port 5
Command: create fdb default 00-00-00-00-01-02 port 5
Success.
DES-3550:4#
110