D-Link DES-3550 Command Line Interface Reference Manual page 139

Example usage:
To delete the mirroring ports:
DES-3550:4#config mirror port 1 delete source port 2-4
Command: config mirror 1 delete source 2-4
Success.
DES-3550:4#
enable mirror
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable mirroring configurations:
DES-3550:4#enable mirror
Command: enable mirror
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to enable a previously entered port mirroring configuration.
enable mirror
This command, combined with the disable mirror command below,
allows you to enter a port mirroring configuration into the Switch, and
then turn the port mirroring on and off without having to modify the
port mirroring configuration.
None.
Only administrator-level users can issue this command.
135