D-Link DES-3550 Command Line Interface Reference Manual page 156

delete link_aggregation group_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete link aggregation group:
DES-3550 Layer 2 Fast Ethernet Switch
Used to delete a previously configured link aggregation group.
delete link_aggregation group_id <value 1-6>
This command is used to delete a previously configured link
aggregation group.
<value 1-6> − Specifies the group ID. The Switch allows up to 6 link
aggregation groups to be configured. The group number identifies
each of the groups.
Only administrator-level users can issue this command.
DES-3550:4#delete link_aggregation group_id 6
Command: delete link_aggregation group_id 6
Success.
DES-3550:4#
152