D-Link DES-3550 Command Line Interface Reference Manual page 111

show stp instance_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
DES-3550:4#show stp instance 0
Command: show stp instance 0
STP Instance Settings
---------------------------
Instance Type
Instance Status
Instance Priority
STP Instance Operational Status
--------------------------------
Designated Root Bridge : 32766/00-90-27-39-78-E2
External Root Cost
Regional Root Bridge
Internal Root Cost
Designated Bridge
Root Port
Max Age
Forward Delay
Last Topology Change
Topology Changes Count : 2987
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DES-3550 Layer 2 Fast Ethernet Switch
Used to display the Switch's STP instance configuration
show stp instance_id <value 0-4>
This command displays the Switch's current STP Instance
Settings and the STP Instance Operational Status.
<value 0-4> - Enter a value defining the previously configured
instance_id on the Switch. An entry of 0 will display the STP
configuration for the CIST internally set on the Switch.
None
: CIST
: Enabled
: 32768(bridge priority : 32768, sys ID ext : 0 )
: 200012
: 32768/00-53-13-1A-33-24
: 0
: 32768/00-50-BA-71-20-D6
: 1
: 20
: 15
: 856
107