D-Link DES-3550 Command Line Interface Reference Manual page 38

Command
config snmp engineID
show snmp engineID
create snmp group
delete snmp group
show snmp groups
create snmp host
delete snmp host
show snmp host
create trusted_host
delete trusted_host
show trusted_host
enable snmp traps
enable snmp
authenticate_traps
show snmp traps
disable snmp traps
disable snmp
authenticate_traps
config snmp system
contact
config snmp system
location
config snmp system
name
enable rmon
disable rmon
Each command is listed, in detail, in the following sections.
DES-3550 Layer 2 Fast Ethernet Switch
Parameters
<snmp_engineID>
<groupname 32> {v1 | v2c |v3 [noauth_nopriv | auth_nopriv | auth_priv ]}
{read_view <view_name 32> | write_view <view_name 32> | notify_view <view_name
32>}
<groupname 32>
<ipaddr> {v1 |v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]} <auth_string 32>
<ipaddr>
<ipaddr>
<ipaddr>
<ipaddr>
<ipaddr>
<sw_contact>
<sw_location>
<sw_name>
34