D-Link DES-3550 Command Line Interface Reference Manual page 265

config authen_enable
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the user defined method list "Permit" with authentication methods tacacs, xtacacs and local, in that
order.
DES-3550:4#config authen_enable method_list_name Trinity method
tacacs xtacacs local
Command: config authen_enable method_list_name Trinity method
tacacs xtacacs local
Success.
DES-3550:4#
Example usage:
To configure the default method list with authentication methods xtacacs, tacacs+ and local, in that order:
DES-3550:4#config authen_enable default method xtacacs tacacs+ local
Command: config authen_enable default method xtacacs tacacs+ local
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
TACACS protocol from a remote TACACS server.
xtacacs – Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
tacacs+ – Adding this parameter will require the user to be authenticated using the
TACACS+ protocol from a remote TACACS+ server.
radius - Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
server_group <string 15> - Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on the
Switch.
local_enable - Adding this parameter will require the user to be authenticated using
the local user account database on the Switch. The local enable password of the
device can be configured using the "config admin local_password" command.
none – Adding this parameter will require no authentication to access the
administration level privileges on the Switch.
261