D-Link DES-3550 Command Line Interface Reference Manual page 310

config sim_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add a member:
DES-3550:4#config sim_group add 2
Command: config sim_group add 2
Please wait for ACK...
GM Config Success !!!
Success.
DES-3550:4#
To delete a member:
DES-3550:4# config sim delete 1
Command: config sim delete 1
Please wait for ACK...
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to add candidates and delete members from the SIM group.
config sim [add <candidate_id 1-32> {<password>} | delete
<member_id 1-32>]
This command is used to add candidates and delete members from
the SIM group by ID number.
add <candidate_id> <password> - Use this parameter to change a
candidate switch (CaS) to a member switch (MS) of a SIM group.
The CaS may be defined by its ID number and a password (if
necessary).
delete <member_id 1-32> - Use this parameter to delete a member
switch of a SIM group. The member switch should be defined by ID
number.
Only administrator-level users can issue this command.
306