D-Link DES-3550 Command Line Interface Reference Manual page 98

enable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable STP, globally, on the Switch:
DES-3550:4#enable stp
Command: enable stp
Success.
DES-3550:4#
disable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable STP on the Switch:
DES-3550:4#disable stp
Command: disable stp
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to globally enable STP on the Switch.
enable stp
This command allows the Spanning Tree Protocol to be globally
enabled on the Switch.
None.
Only administrator-level users can issue this command.
Used to globally disable STP on the Switch.
disable stp
This command allows the Spanning Tree Protocol to be globally
disabled on the Switch.
None.
Only administrator-level users can issue this command.
94