D-Link DES-3550 Command Line Interface Reference Manual page 254

Each command is listed, in detail, in the following sections.
enable authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the system access authentication policy:
DES-3550:4#enable authen_policy
Command: enable authen_policy
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to enable system access authentication policy.
enable authen_policy
This command will enable an administrator-defined authentication
policy for users trying to access the Switch. When enabled, the
device will check the method list and choose a technique for user
authentication upon login.
None.
Only administrator-level users can issue this command.
250