D-Link DES-3550 Command Line Interface Reference Manual page 56

create trusted_host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the trusted host:
DES-3550 Layer 2 Fast Ethernet Switch
Used to create the trusted host.
create trusted_host <ipaddr>
The create trusted_host command creates the trusted host. The Switch allows you to
specify up to four IP addresses that are allowed to manage the Switch via in-band SNMP
or TELNET based management software. These IP addresses must be members of the
Management VLAN. If no IP addresses are specified, then there is nothing to prevent any
IP address from accessing the Switch, provided the user knows the Username and
Password.
<ipaddr> − The IP address of the trusted host to be created.
Only administrator-level users can issue this command.
DES-3550:4#create trusted_host 10.48.74.121
Command: create trusted_host 10.48.74.121
Success.
DES-3550:4#
52